On Monday 16 December 2024 11:27:52 Central European Standard Time Carlos Flores via LibreMesh wrote:
> The problem we’re facing,
> whether through the lime-app or via CLI using the lime-config command,
> is that after modifying the node configuration and executing a reboot,
> the antenna returns to its factory state, meaning all the configurations
> are erased.
>
> We are able to write and create files normally, but after a reboot, they
> are lost. It looks like as if the filesystem is running in RAM.
Hello!
Indeed the screenshots show that the overlayfs is mounted from /tmp/root which is in RAM. The overlayfs is used to store all changes made to the root filesystem. This is why the configuration is lost after reboot.
This can happen when the image is to large and there is not enough space left in flash for a persistent read-write filesystem. Can you please check if the problem also occurs with the mini-variant of LibreMesh?
https://downloads.libremesh.org/releases/2024.1-rc1-ow23.05.3-mini/targets/ath79/generic/
Regards
Pony
