Re: [lime] release candidate test report

Delete this message

Reply to this message
Autor: Ilario
Data:  
Dla: libremesh
Temat: Re: [lime] release candidate test report
Thanks Pony for the amazing quality of the testing!
You proposed many fixes that are going to improve the quality of the
next release A LOT.
If it is ok for you, in the next project meeting the funds for the
second half of the "testing grant" payment will be made available :D

One curiosity: the IEEE802.11r roaming, it works only when psk2 (WPA2)
is used, right? Or would it help even with open networks?

I heard that Selankon is preparing a new release of lime-app (!!!!).

Hiure, what do you think about the current status of the code?

@all, what about creating a LibreMesh release candidate as soon as we
have the lime-app release?

Ciao!
Ilario



On 2/24/24 20:57, pony via LibreMesh wrote:
> Hi!
>
> Here comes my test report.
>
> I used the following topologies for testing:
>
> Topology #1
>     internet1
>     ~wifi~
>     dual_band#1
>     ~wifi~
>     dual_band#2
>     -cable-
>     single_band#1
>     ~wifi~
>     single_band#2
>     -cable-
>     internet2
> Topology #2
>     internet1
>     -cable-
>     dual_band#1
>     ~wifi~
>     dual_band#2
>     -cable-

>
>     single_band#1
>     ~wifi~
>     dual_band#3 (non-dsa)
>     -cable-
>     dual_band#4
>     ~wifi~

>
>     dual_band#5
>     -cable-
>     single_band#2
>     -cable-
>     internet2

>
> In Topology #2, the first two, middle three and last two nodes were configured as 3 seperate mesh-clouds (seperate ssids and layer 2 domain).
> I left the ethernet interfaces connecting to other routers inside br-lan ("lime proto lan"). batadv has a feature called Bridge Loop Avoidance that can handle this.
>
> This is the hardware that was used:
> single_band#1 TP-LINK TD-W8970
> single_band#2 TP-LINK TD-W8970
> dual_band#1: Xiaomi Redmi Router AX6S
> dual_band#2: TP-Link RE650 v1
> dual_band#3: TP-Link Archer C20i
> dual_band#4: TP-Link Archer C6 v3
> dial_band#5: MERCUSYS MR70X v1
>
> The following experiments were conducted:
> i) Automatic switching of default gateway: I checked that when internet1 is down, internet2 is used. When internet2 is down, internet1 is used. Each for both wifi and cable clients.
> ii) Lease sharing: The dhcp-leases are distributed in the network. I checked that a node does not give an ip address to a client that another node has given to another client.
> iii) Roaming: Roaming was triggered with wpa_cli roam command, while pinging the default gateway (anygw address). Sadly, the connection was interrupted for about 1100ms every time. I then placed the two routers at distant places and walked back and forth between them. Still the connection was interrupted for at least 1100ms when switching APs. I tried intel 7260, RTL8814AU and a shift5me smartphone as client device, with similiar results. I don't know why this is. Maybe my devices are just crappy. Even without 802.11r, it shouldn't be more than 200ms. I don't know for sure if any of my wifi client devices support 802.11r fast transition. 802.11r should, with the right settings, reduce the interruption to below 50ms.
> iv) Local DNS: DNS resolution of hosts in the network worked fine.
>
> To enable 802.11r fast transition support on a node, it should be sufficient to put
>
>     option ap_ieee80211r '1'
>     option ap_reassociation_deadline '20000'
>     option ap_ft_psk_generate_local '1'
>     option ap_ft_over_ds '0'

>
> into the "config lime wifi" section inside the lime-node or lime-community file.
>
> Attached you find
> - all lime-node and lime-community files that I used.
> - pack lists for imagebuilder that I used to make up to date images.
> - some logs
> - a python script that I wrote to measure connection interruption times during roaming using ipv6 ping.
>
> Have I forgot something? Let me know if there are any questions.
>
> Liebst
> Pony
>
>


--
Ilario
iochesonome@???
ilario@???