Re: [lime] Firmware images of latest libremesh based on open…

Nachricht löschen

Nachricht beantworten
Autor: Gio
Datum:  
To: LibreMesh.org project mailing list
Betreff: Re: [lime] Firmware images of latest libremesh based on openwrt 23.05.0
As said before I have been working on top of OpenWrt development
versions since months, IMHO building on top of 23.05.0 have more
probability of having a good result that on top of 22.03

About the name after the very involved EE what about
Fantastic Forwarder?

Cheers
Gio

On 27/10/2023 14:33, Ilario via LibreMesh wrote:
> Nice!!!
>
> Do you people think that the next release could even be based on 23.05?
>
> I mean, until now we have a release candidate based on 22.03, which does
> not seem is getting much love, so we could even go straight to 23.05.
> Clearly, this would mean that more testing is needed, but a lot of
> testing is still needed anyway...
>
> Looking at the release notes, it does not seem that there was any major
> change (like the switch configuration change in 21.02, or the fw4 and
> the ujail in 22.03):
> https://openwrt.org/releases/23.05/notes-23.05.0
>
> On another topic:
> we also miss a codename for the next release! It should start with F, as
> the previous one was Expansive Emancipation. Throw some ideas in!
> Add yours here:
> https://pad.codigosur.org/LibreMesh-2023-codename
>
> Ciao!
> Ilario
>
>
>
> On 10/27/23 12:22, Gio via LibreMesh wrote:
>> Ottimo lavoro, adelante!
>>
>> On 26/10/2023 18:44, gothos via LibreMesh wrote:
>>> Hi folks!
>>>
>>> Hoping that tests of libremesh based on latest openwrt 23.05.0 could
>>> be easier and more numerous, without necessarily having also to
>>> compile openwrt/libremesh.
>>>
>>> I've done a built of libremesh for a large list of devices supported
>>> by openwrt.
>>>
>>> Based on the latest 23.05.0 of OpenWrt (13 october 2023)
>>> I've used the master branch of LibreMesh at commit @d0c498f (22
>>> october 2023)
>>>
>>> That is after the fix of @pony1k "fix bridge device section confusion"
>>> https://github.com/libremesh/lime-packages/commit/d0c498f7fec2512cece194c2da2b4d481a3aec6c
>>>
>>> Builds are available at
>>> https://firmware-libremesh.antennine.campiinrete.org/releases/master-ow23/
>>>
>>>
>>>
>>> I briefly report also a quick test I've made on a lantiq/xway
>>> netgear_dgn3500 without noticing errors
>>>
>>> Before flashing
>>> Just to remember a good approach: checkout if something is changed
>>> when flashing your router, checking:
>>> the openwrt's device page: (i.e.
>>> https://openwrt.org/toh?do=search&id=toh&q=netgear_dgn3500"
>>> the forum: https://forum.openwrt.org
>>> the issue tracker: https://github.com/openwrt/openwrt/issues
>>>
>>> After flashing
>>> I've connected the libremesh device as a client of an AP
>>> I've modified /etc/opkg/distfeed.conf to be able to install kernel
>>> modules (kmods) compiled during the build of the firmware images (to
>>> avoid kernel version mismatch errors, etc).
>>>
>>> Command to replace source of kernel modules
>>>      awk
>>> '!x{x=sub("downloads.openwrt.org/releases/23.05.0/","firmware-libremesh.antennine.campiinrete.org/releases/master-ow23/")}7' /etc/opkg/distfeeds.conf
>>>
>>> Update opkg packages list
>>>      opkg update
>>>
>>> Installing packages
>>>      opkg install luci prometheus-node-exporter-lua
>>>
>>> Installing a 'network-profile'
>>>      opkg install profile-libremesh-default
>>>
>>>
>>>
>