著者: Gio 日付: To: gothos via LibreMesh 題目: Re: [lime] Firmware images of latest libremesh based on openwrt
23.05.0
Ottimo lavoro, adelante!
On 26/10/2023 18:44, gothos via LibreMesh wrote: > Hi folks!
>
> Hoping that tests of libremesh based on latest openwrt 23.05.0 could be
> easier and more numerous, without necessarily having also to compile
> openwrt/libremesh.
>
> I've done a built of libremesh for a large list of devices supported by
> openwrt.
>
> Based on the latest 23.05.0 of OpenWrt (13 october 2023)
> I've used the master branch of LibreMesh at commit @d0c498f (22 october
> 2023)
>
> That is after the fix of @pony1k "fix bridge device section confusion"
> https://github.com/libremesh/lime-packages/commit/d0c498f7fec2512cece194c2da2b4d481a3aec6c >
> Builds are available at
> https://firmware-libremesh.antennine.campiinrete.org/releases/master-ow23/ >
>
>
> I briefly report also a quick test I've made on a lantiq/xway
> netgear_dgn3500 without noticing errors
>
> Before flashing
> Just to remember a good approach: checkout if something is changed when
> flashing your router, checking:
> the openwrt's device page: (i.e.
> https://openwrt.org/toh?do=search&id=toh&q=netgear_dgn3500"
> the forum: https://forum.openwrt.org > the issue tracker: https://github.com/openwrt/openwrt/issues >
> After flashing
> I've connected the libremesh device as a client of an AP
> I've modified /etc/opkg/distfeed.conf to be able to install kernel
> modules (kmods) compiled during the build of the firmware images (to
> avoid kernel version mismatch errors, etc).
>
> Command to replace source of kernel modules
> awk
> '!x{x=sub("downloads.openwrt.org/releases/23.05.0/","firmware-libremesh.antennine.campiinrete.org/releases/master-ow23/")}7' /etc/opkg/distfeeds.conf
>
> Update opkg packages list
> opkg update
>
> Installing packages
> opkg install luci prometheus-node-exporter-lua
>
> Installing a 'network-profile'
> opkg install profile-libremesh-default
>
>
>
