Re: [Tails-testers] Tails 4.0 Beta 1

Nachricht löschen

Nachricht beantworten
Autor: Tom Watson
Datum:  
To: tails-testers
Betreff: Re: [Tails-testers] Tails 4.0 Beta 1
Img was mounted using Etcher.

Tried running the Beta 2 using:

tails-amd64-devel-4.0-20191002T0658Z-41d6d63332.img

Results were the same as previously reported whether letting it try to boot
without interference; via Safe Mode; or TAB and nosplash (also produced the
three horizontal pixelated lines). Safe Mode resulted in:

(inittramfs) Unable to fina d medium containing a live file system

No difference using 3.0 or 2.0.

The USB sticks used run 3.16 with no problem.

Tom

On Wed, Oct 2, 2019 at 2:59 PM intrigeri <intrigeri@???> wrote:

> Hi,
>
> (fully quoting with Tom's permission.)
>
> Tom Watson:
> > Tried Beta2 on two USB sticks with no luck. Did the same thing on both:
>
> > Showed the initial screen where you can choose between Tails and Tails
> > (Safe Mode).
>
> > If Tails is chosen, screen goes black and awhile later three pixelated
> > horizontal lines appear in the upper third of the screen and nothing else
> > happens.
>
> OK. What if you edit the boot options for the "Tails" entry (by
> pressing TAB) and add "nosplash" (without the quotes) at the end?
>
> > If Safe Mode is chosen, some operating text scrolls by, the screen goes
> > black, then this message is displayed:
>
> > (inittramfs) Unable to fina d medium containing a live file system
>
> > And that's it.
>
> How exactly did you install Tails on this USB stick?
>
> I advice you use the USB image (.img) and Etcher (on Windows or macOS)
> or GNOME Disks (on Linux).
>
> It could also be interesting to retry with a USB 2.0 (as opposed to
> USB 3.0) stick, or any USB stick plugged into a USB 2.0 port: the
> error above could be caused by USB 3 being badly supported.
>
> On top of that, it would be awesome if you could try a nightly build
> of our "devel" branch, that has an updated Linux kernel which might
> help:
>
>
> https://nightly.tails.boum.org/build_Tails_ISO_devel/lastSuccessful/archive/build-artifacts/
>
> Here as well, pick the USB image (.img).
>
> Thanks in advance!
>
> Cheers,
> --
> intrigeri
>