[Tails-testers] tested usb direct version

Delete this message

Reply to this message
Autor: T
Data:  
A: tails-testers
Assumpte: [Tails-testers] tested usb direct version
Well, I tried the usb-direct beta image on a dell xps 13" v9343
   I found that it did not work, I looked at the suggestion (below) ...
Not applicable as the boot attempt gave me "selected boot device failed. 
"
    I could not make any change to the system at that point, I did try 
both legacy and uefi, neither worked
I have an old lenovo thinkpad T61, it worked on it, I have a macbookpro 
from mid 2015, it worked.
    I tryed several loaders, etcher (the new version linked on tails page 
comes with an advertisement, unlike the older version I already had), I 
also tried linux disks restore (first time I found disks to be better 
than gParted!)
     they all worked to boot the lenovo, but none worked to boot the dell
Also, 2 other mysteries.   the partition size was usually 8.6gb (thanks 
for expanding that !!), but a couple tryes yielded a 1.2 gb partition 
for the tails system, secondarily, one of my attempts gave me a fully 
functioning tails 3.7 stick, which is weird as I have no .iso or .dmg of 
3.7, have not run that version for at least half a year, and the stick I 
used to create it had recently been upgraded from 3.8 to 3.11  ...    
maybe it had traces of previous 3.7 on it somehow??    real mystery!!




-------- Original Message --------
Subject: Re: Bug report: e55e58098265a0607a777f923b501fab
Date: 20/01/2019 04:42
From: tails-bugs@???
To: thomas@???

Hi !

>     <tails-tester@???>: Recipient address rejected: User unknown
> in
>     virtual mailbox table (in reply to RCPT TO command)


the right mailing list address is tails-testers@??? :)


> then it did NOT work on my dell xps-13 v9343 =(


there is a graphic issue preventing Tails from booting on some XPS
models, could you try the workaround documented there :

https://tails.boum.org/support/known_issues/index.en.html#index13h3

cheers.