Re: [Tails-dev] problems creating usb stick for tails 1.7

Delete this message

Reply to this message
Autor: tim smy
Data:  
Dla: tails-dev
Stare tematy: [Tails-dev] problems crsting usb stick for tails 1.7
Temat: Re: [Tails-dev] problems creating usb stick for tails 1.7


Here is a update log to my previous post showing more deatils.
 
I followed the set up of tails on a usb drive as per the tails web site ,
however since I have a UFEI BIOS-(windows 10) then the universal usb installer will not work
 
The alternative it seems is to use a software called Rufus 2.5.799
Here are the options that I think may be  correct. please find log at foot of this email.
 
Divce:
maas 8gb
 
Partition scheme and target system type:
MBR partition scheme for BIOS or UFEI
 
File system:
FAT32(default)
 
Cluster size:
4096 bytes (default)
 
new volume label
tails 1.7
 
create a bootable disk using:
ISO image
 
there are other options to choose from which I did not take advantage of just yet
 
Here is the log which stops at the last entry for some reason:

Found USB 2.0 device 'Lexar USB Flash Drive USB Device' (05DC:A81D)
1 device found
Disk type: Removable, Sector Size: 512 bytes
Cylinders: 974, TracksPerCylinder: 255, SectorsPerTrack: 63
Partition type: MBR, NB Partitions: 1
Disk ID: 0x0031A317
Drive has a Syslinux Master Boot Record
Partition 1:
Type: FAT32 (0x0b)
Size: 7.5 GB (8015314944 bytes)
Start Sector: 2048, Boot: No, Recognized: Yes
Scanning image...
ISO analysis:
Image is an ISO9660 image
Will use '/isolinux/isolinux.cfg' for Syslinux
Detected Syslinux version: 6.03/20150326 (from '/EFI/BOOT/isolinux.bin')
Disk image analysis:
Image has an unknown Master Boot Record
Image is a bootable disk image
ISO label: 'TAILS 1.7 - 20151103'
Size: 1052835840 bytes
Has a >64 chars filename: No
Has Symlinks: No
Has a >4GB file: No
Uses Bootmgr: No
Uses EFI: Yes
Uses Grub 2: No
Uses Grub4DOS: No
Uses isolinux: Yes (6.03)
Uses KolibriOS: No
Uses ReactOS: No
Uses WinPE: No
Using image: tails-i386-1.7.iso

Computing checksum for 'C:\Users\akincana\Downloads\tails-i386-1.7.iso'...
  MD5:     dfbc1337a118a2fc87e7bfeaf8e8870e
  SHA1:     b53fb15773da339a16595c047b71ffd9a88255da
  SHA256: 372ba423c46ce76393f5e8cd64136e5e9c4a806def993951fe8dbf7d93be2546
Downloading 'ldlinux.sys' from http://rufus.akeo.ie/files/syslinux-6.03/20150326/ldlinux.sys
Unable to access file: 404
Extended version was not found, trying main version
Downloading 'ldlinux.sys' from http://rufus.akeo.ie/files/syslinux-6.03/ldlinux.sys
File length: 68599 bytes
Successfully downloaded 'ldlinux.sys'
Downloading 'ldlinux.bss' from http://rufus.akeo.ie/files/syslinux-6.03/20150326/ldlinux.bss
Unable to access file: 404
Extended version was not found, trying main version
Downloading 'ldlinux.bss' from http://rufus.akeo.ie/files/syslinux-6.03/ldlinux.bss
File length: 512 bytes
Successfully downloaded 'ldlinux.bss'


Format operation started
Requesting disk access...
Opened drive \\.\PHYSICALDRIVE1 for write access
Will use 'G:' as volume mountpoint
I/O boundary checks disabled
Analyzing existing boot records...
Drive has a Syslinux Master Boot Record
Volume has an unknown Partition Boot Record
Deleting partitions...
Clearing MBR/PBR/GPT structures...
Erasing 128 sectors
Partitioning (MBR)...
Closing existing volume...
Waiting for logical drive to reappear...
Formatting (FAT32)...
Using cluster size: 4096 bytes
Slow format was selected
Creating file system...
Format completed.
Writing master boot record...
Drive has a Zeroed Master Boot Record
Set bootable USB partition as 0x80
Using Syslinux MBR
Found volume GUID \\?\Volume{ac77ce43-9b11-11e5-9bef-0c5b8f279a64}\
Installing Syslinux 6.03...
Using existing './rufus_files/syslinux-6.03/20150326/ldlinux.sys'
Using existing './rufus_files/syslinux-6.03/20150326/ldlinux.bss'
Successfully wrote 'ldlinux.sys'
Opened drive \\?\Volume{ac77ce43-9b11-11e5-9bef-0c5b8f279a64} for write access
Successfully wrote Syslinux boot record
Successfully remounted Volume{ac77ce43-9b11-11e5-9bef-0c5b8f279a64}\ on G:\
Copying ISO files...
Extracting files...
libcdio: Found Extension: Joliet Level 3
Image is an ISO9660 image
This image will be extracted using Joliet extensions (if present)
Extracting: G:\.disk\archive_trace (1 bytes)
Extracting: G:\.disk\info (80 bytes)
Extracting: G:\EFI\BOOT\bootia32.efi (294.5 KB)
Extracting: G:\EFI\BOOT\bootx64.efi (175.1 KB)
Extracting: G:\EFI\BOOT\bootx64.png (7.1 KB)
Extracting: G:\EFI\BOOT\cat.c32 (2.3 KB)
Extracting: G:\EFI\BOOT\chain.c32 (27.7 KB)
Extracting: G:\EFI\BOOT\cmd.c32 (1.8 KB)
Extracting: G:\EFI\BOOT\cmenu.c32 (5 KB)
Extracting: G:\EFI\BOOT\config.c32 (2.1 KB)
Extracting: G:\EFI\BOOT\cptime.c32 (5.2 KB)
Extracting: G:\EFI\BOOT\cpu.c32 (5.5 KB)
Extracting: G:\EFI\BOOT\cpuid.c32 (2.4 KB)
Extracting: G:\EFI\BOOT\cpuidtest.c32 (3.5 KB)
Extracting: G:\EFI\BOOT\debug.c32 (2.2 KB)
Extracting: G:\EFI\BOOT\dhcp.c32 (5.2 KB)
Extracting: G:\EFI\BOOT\disk.c32 (2.7 KB)
Extracting: G:\EFI\BOOT\dmi.c32 (10 KB)
Extracting: G:\EFI\BOOT\dmitest.c32 (14.1 KB)
Extracting: G:\EFI\BOOT\elf.c32 (4.2 KB)
Extracting: G:\EFI\BOOT\ethersel.c32 (3.7 KB)
Extracting: G:\EFI\BOOT\f1.txt (841 bytes)
Extracting: G:\EFI\BOOT\f10.txt (728 bytes)
Extracting: G:\EFI\BOOT\f2.txt (424 bytes)
Extracting: G:\EFI\BOOT\f3.txt (597 bytes)
Extracting: G:\EFI\BOOT\f4.txt (357 bytes)
Extracting: G:\EFI\BOOT\f5.txt (807 bytes)
Extracting: G:\EFI\BOOT\f6.txt (1.1 KB)
Extracting: G:\EFI\BOOT\f7.txt (933 bytes)
Extracting: G:\EFI\BOOT\f8.txt (181 bytes)
Extracting: G:\EFI\BOOT\f9.txt (747 bytes)
Extracting: G:\EFI\BOOT\gfxboot.c32 (13.1 KB)
Extracting: G:\EFI\BOOT\gpxecmd.c32 (2.3 KB)
Extracting: G:\EFI\BOOT\grub\grub.cfg (413 bytes)
 
 
 
thanks for any feedback
tim
 
 
 
 
 
 
 _______________________________________________ Tails-dev mailing list Tails-dev@??? https://mailman.boum.org/listinfo/tails-dev To unsubscribe from this list, send an empty email to Tails-dev-unsubscribe@???.