Re: [Tails-testers] UEFI Nightly 05112014--Unable to Image B…

Delete this message

Reply to this message
Autore: Vox
Data:  
To: Tails list for early testers
Oggetto: Re: [Tails-testers] UEFI Nightly 05112014--Unable to Image Beta USB from Alpha GUI
Correction:

On my procedure list for my solution:

    > 34) Gamma USB Tails Installer can now be used to Clone &
    Upgrade Beta USB.


Is incorrect. Gamma's USB Tails Installer would still NOT work.
Although the system was running & persistence was recognized on
multiple reboots, Tails Installer "Beta" of
tails-i386-feature_uefi-1.1-20140512T1451Z-2947c63.iso does not
function (at least with my hardware setup). In order to update to an
ISO released after May 10 2014, I must go through the procedure below
again of making a "Beta" of
tails-i386-feature_uefi-1.1-20140510T0745Z-2947c63.iso, configuring
persistence, downloading the desired newer iso to the
tails-i386-feature_uefi-1.1-20140510T0745Z-2947c63.iso Beta, and using
the Upgrade Iso to select the newer iso & target USB for the upgrade.


On Mon, 12 May 2014 23:52:00 +0000
Vox <voxclara@???> wrote:

> Update with my Solution at the end:
>
> --On a MacBook Pro 11,3--
>
> The procedure of:
>
> 1) Image Alpha iso in OSX using perl isohybrid.pl [uefi-iso]
> 2) sudo dd if=[uefi-iso] of=/dev/(r)disk[#]
> 3) Boot newly imaged USB of Alpha
> 4.) Insert Beta USB target USB
> 5.) Using Tails Installer, Install Tails on Beta USB
>
> ERROR:
>     Continues to fail for:
>         tails-i386-feature_uefi-1.1-20140512T1451Z-2947c63.iso
>         tails-i386-feature_uefi-1.1-20140512T0748Z-2947c63.iso
>         tails-i386-feature_uefi-1.1-20140511T1456Z-2947c63.iso

>
>         I attempted using all three options on the Tails
>         Installer, none would work.

>
>
>
> ***Workaround (Requires 1 additional USB or unessary extra download
> traffic over tor network):***
>
> 1) Boot into OSX
> 2) Download tails-i386-feature_uefi-1.1-20140510T0745Z-2947c63.iso
> 3) # perl isohybrid.pl
> tails-i386-feature_uefi-1.1-20140510T0745Z-2947c63.iso
> 4) Insert target Alpha USB
> 5) #diskutil unmountDisk /dev/disk[#]
> 6) sudo dd if=tails-i386-feature_uefi-1.1-20140510T0745Z-2947c63.iso
> of=/dev/disk[#]
> 7) Boot Alpha of
> tails-i386-feature_uefi-1.1-20140510T0745Z-2947c63.iso 8) Create Beta
> of tails-i386-feature_uefi-1.1-20140510T0745Z-2947c63.iso using Tails
> Installer.
> 9) Remove Beta USB
>
> **10) Insert Gamma USB
> **11) Install Tails to Gamma USB from Alpha USB Tails Installer in the
> Same Manner as we just installed it to Beta USB.
>
> 12) Shutdown Tails Alpha USB
> 13) Confirm that both Beta & Gamma USB's EFI boot.
> 14) Boot into OSX
> 15) Download tails-i386-feature_uefi-1.1-20140512T1451Z-2947c63.iso
> 16) Insert Alpha USB, Use DiskUtility, repartition, erase, & reformat
> drive to FAT--we'll name the new partition 'TRANSFER'.
> 17) Copy (as in drag-drop, not image/dd)
> tails-i386-feature_uefi-1.1-20140512T1451Z-2947c63.iso onto TRANSFER
> 18) Eject TRANSFER, Remove USB
> 19) Power OSX off
> 20) Insert Tails Beta USB, Boot & Configure Persistence for Files
> 21) Insert TRANSFER USB, copy
> tails-i386-feature_uefi-1.1-20140512T1451Z-2947c63.iso from TRANSFER
> to Tails Beta USB Persistence.
> 22) Eject & Remove TRANSFER USB
> 23) Insert Gamma USB
> 24) Launch the Beta USB Tails Installer
> 25) Select Upgrade from ISO
> 26) Browse to & select the
> tails-i386-feature_uefi-1.1-20140512T1451Z-2947c63.iso that we just
> copied to Beta USB's persistence.
> 27) Select Gamma (/dev/sd#) from Target Device List
> 28) Select Install Tails *Success*
> 29) Eject & Remove Gamma USB
> 30) Poweroff Beta USB Tails, remove USB
> 31) Insert Gamma USB & Boot Tails from Gamma
> 32) Select Applications-->Tails-->About Tails
> 33) Confirm: 
>     Build information:
>     1.1 - 20140512
>     2947c63515e71473a4ff33772b07cea1799c3479
>     live-build: 3.0.5+really+is+2.0.12-0.tails1
>     live-boot: 3.0.1-1
>     live-config: 3.0.23-1
> 34) Gamma USB Tails Installer can now be used to Clone & Upgrade Beta
> USB.

>
>
> On Mon, 12 May 2014 17:21:37 +0000
> mercedes508 <mercedes508@???> wrote:
>
> > Hi,
> >
> > > On the 05-11-2014 (approx. utc 15:00 commit) of the nightly
> > > UEFI iso; following the process for creating a Tails Nightly UEFI
> > > test USB; The creation of my "Beta" USB from my sucessfully
> > > imaged & launched Alpha fails in that the GUI from
> > >
> > > Applications-->Tails-->Tails
> > > Installer
> > >
> > > Launches and allows for selection of a target disk; but does not
> > > image the disk via the GUI when clicking "OK".
> >
> > Could you try with another Tails UEFI ISO please?
> >
> > Cheers.
> >
>
> _______________________________________________
> Tails-testers mailing list
> Tails-testers@???
> https://mailman.boum.org/listinfo/tails-testers
> To unsubscribe from this list, send an empty email to
> Tails-testers-unsubscribe@???.