[mW] cosi', per dire

Delete this message

Reply to this message
Author: Elettrico
Date:  
Subject: [mW] cosi', per dire
mi sono accattato un d-link 900ap+ e una sconosciuta sk pcmcia ew220
della roper, la quale dichiara cio' all'inserimento:

Jul 9 12:25:17 tron cardmgr[57]: socket 0: Z-Com XI300 11Mb/s 802.11b
WLAN Card
Jul 9 12:25:17 tron cardmgr[57]: executing: 'modprobe prism2_cs'
Jul 9 12:25:17 tron cardmgr[57]: + Warning: loading
/lib/modules/2.4.18/net/p80211.o will taint the kernel: no license
Jul 9 12:25:17 tron cardmgr[57]: + See
http://www.tux.org/lkml/#export-tainted for information about tainted
modules
Jul 9 12:25:17 tron cardmgr[57]: + Module p80211 loaded, with warnings
Jul 9 12:25:17 tron cardmgr[57]: + Warning: loading
/lib/modules/2.4.18/pcmcia/prism2_cs.o will taint the kernel: no license
Jul 9 12:25:17 tron kernel: init_module: prism2_cs.o: 0.1.10 Loaded
Jul 9 12:25:17 tron kernel: init_module: dev_info is: prism2_cs
Jul 9 12:25:17 tron cardmgr[57]: + Module prism2_cs loaded, with warnings
Jul 9 12:25:18 tron kernel: prism2_cs: index 0x01: Vcc 5.0, irq 3, io
0x0100-0x013f
Jul 9 12:25:18 tron kernel: ident: nic h/w: id=0x8002 1.0.0
Jul 9 12:25:18 tron kernel: ident: pri f/w: id=0x15 0.3.0
Jul 9 12:25:18 tron kernel: ident: sta f/w: id=0x1f 1.3.4
Jul 9 12:25:18 tron kernel: MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1
Jul 9 12:25:18 tron kernel: CFI:SUP:role=0x00:id=0x02:var=0x01:b/t=1/1
Jul 9 12:25:18 tron kernel: PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=1/2
Jul 9 12:25:18 tron cardmgr[57]: executing: './wlan-ng start wlan0'
Jul 9 12:25:18 tron kernel: STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/9
Jul 9 12:25:18 tron kernel: PRI-CFI:ACT:role=0x01:id=0x02:var=0x01:b/t=1/1
Jul 9 12:25:18 tron kernel: STA-CFI:ACT:role=0x01:id=0x02:var=0x01:b/t=1/1
Jul 9 12:25:18 tron kernel: STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1
Jul 9 12:25:18 tron kernel: Prism2 card SN: 99SA01000000


i simpatici wireless tools mi dicono cosi:

root@tron:~# iwconfig wlan0
wlan0     no wireless extensions.



e i normali comandi tipo ifconfig mi dicono di sucare, nel senso che
ifconfig wlan0 mi dice cosi':

wlan0     Link encap:Ethernet  HWaddr 00:60:B3:68:F4:59
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:3 Base address:0x100



ma ifconfig wlan0 ip rimane fermo all'infinito.
questo con i driver della sk, mentre con orinoco_cs non vi sono
problemi, funziona tutto, tranne il monitor mode (si', li ho patchati,
ma se ne fotte).

ora pastrocchio un po' e al max ritorno all'orinoco_cs, pero' mi ruga.