Heya. Networking may not be the issue if the interface used in the internet download test is the same one used for pc1>pc2 test, I would look at disk controller / driver or hardware.
FYI: mii-tool don't work on wireless , use the ethtool command instead.
Code:
[root@eff w_scan-20080105]# ethtool eth1
Settings for eth1:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbag
Wake-on: g
Current message level: 0x00000001 (1)
Link detected: yes
Code:
[root@eff w_scan-20080105]# ifconfig eth0 |tail -n 6
RX packets:1180670 errors:0 dropped:0 overruns:0 frame:0
TX packets:815569 errors:152 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1344892055 (1.2 GiB) TX bytes:116989431 (111.5 MiB)
Interrupt:3 Base address:0x9100
-------------------- m2f --------------------
Sent using Mail2Forum (
http://www.mail2forum.com).
Read this topic online here:
http://forums.blagblagblag.org/viewtopic.php?p=26453#26453
-------------------- m2f --------------------
